Description
Full set of reproduction 3D-printed spark plug wire clamps (aka clips, aka looms) for the Gen1 and Gen2 (1989-1995) Ford Taurus SHO V6 engine (they fit both the 3.0L and the 3.2L available in those years).
These are the small plastic clips that screw to the valve covers and keep the spark plug wires routed nicely. Most of the OEM clamps are 29+ years old and the plastic is often cracked and the metal reinforcement plates under most of them delaminated, causing them to just hang from the plug wires — if they are present at all.
These clamps have likely never been produced since Ford discontinued the part in the 1990s, so all of the parts out there today are decades old.
These clamps are printed on an HP Multi-Jet Fusion 3D printer from Nylon 12, which has these properties:
Strong and durable, Good chemical resistance. Slightly grainy and coarse to the touch
Heatproof: 175° C (347° F)
Applications: Mechanical & structural parts, mounts, cases, tech accessories, functional parts.
Notes: The final color of PA12 Nylon prints will be “Natural Gray” or “Dyed Black”
NOTE: Mounting screws for these clips are available here.
NOTE: If you have a 3D printer, you can purchase the STL files and print them yourself here. We recommend printing these in something like ABS (preferably glass-fibre ABS for extra strength) to withstand under-hood temperatures.
There are seven distinct types of clamp in a full set, as notated in this diagram (NOTE: The seventh clamp — “Triple clamp, Floating” — is not included in the product photos above because it was not discovered until after those photos were taken, but it will be included in the set you receive):
They are described in this table:
| Triple clamp (3) | On driver’s side of front valve cover |
| Triple clamp (3) | Underneath rear of intake near throttle body |
| Triple clamp (6) | On driver’s side of rear valve cover |
| Double clamp, rear (5) | On middle of rear valve cover |
| Double clamp, front (2) | On middle of front valve cover |
| Single clamp, front (1) | On passenger’s side of front valve cover |
| Single clamp, rear (4) | On passenger’s side of rear valve cover |
| Triple clamp, floating (7) | Underneath intake, in front of the throttle body |
A full set is eight (8) clamps:
(2) “3” triple clamps
(1) “6” triple clamp
(1) “5”double clamp (with prong)
(1) “2” double clamp (without prong)
(1) “1” single clamp (without prong)
(1) “4” single clamp (with prong)
(1) “7” triple clamp
NOTE: Shipping is FREE via USPS in a padded envelope to US & Canada only.
Reviews
There are no reviews yet.